CamBam
News:
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
December 12, 2018, 14:09:21 pm


Login with username, password and session length


Pages: [1]
  Print  
Author Topic: [47] SOLVED - Bad toolpath  (Read 1588 times)
CLAUDESAINT
CNC Ewok
*
Offline Offline

Posts: 24


View Profile
« on: March 13, 2018, 07:19:30 am »

Hi,
I find a problem, as you see on the picture Bugg_1.jpg, the toolpath of middle shape is very bad, to solve the problem the solutions was to inclinate (0.98 deg plus or minus) shape right and shape left.
Do you have an idea of this trouble?
I join cb file

Salutations


* Bugg_1.jpg (162.22 KB, 1542x936 - viewed 100 times.)
* Rallonge_2_Half_Bugg.cb (1317.89 KB - downloaded 52 times.)
« Last Edit: July 07, 2018, 01:44:10 am by dh42 » Logged
EddyCurrent
CNC Jedi
*****
Offline Offline

Posts: 3694



View Profile
« Reply #1 on: March 13, 2018, 07:57:59 am »

Look at the shape of your polyline, C'est comme une scie

New cb file attached


* Image6.jpg (59.8 KB, 1000x730 - viewed 80 times.)
* Rallonge_2_Half_Bugg-B.cb (421.42 KB - downloaded 49 times.)

* Image7.jpg (53.31 KB, 800x624 - viewed 73 times.)
« Last Edit: March 13, 2018, 08:30:52 am by EddyCurrent » Logged
CLAUDESAINT
CNC Ewok
*
Offline Offline

Posts: 24


View Profile
« Reply #2 on: March 13, 2018, 14:36:31 pm »

je sais, mais c'est ce que genere cambam
Pourquoi il me genere des scie lorsque la piece et droite alors que sur les autres il n'y a pas de probleme.
et aussi pourquoi uniquement d'un coté?

Salutations

Logged
EddyCurrent
CNC Jedi
*****
Offline Offline

Posts: 3694



View Profile
« Reply #3 on: March 13, 2018, 15:03:33 pm »

To get the boundary profile line I did this;

1. select the surface then, Edit->Surface->Edge Detect
2. explode the lines produced
3. delete all unwanted lines
4. draw a line across each end to make a closed line
5. select the lines then, Edit->Join

The result was a good straight boundary line.


* Image4.jpg (38.13 KB, 800x602 - viewed 124 times.)

* Image5.jpg (74.79 KB, 800x854 - viewed 85 times.)
« Last Edit: March 13, 2018, 15:13:09 pm by EddyCurrent » Logged
CLAUDESAINT
CNC Ewok
*
Offline Offline

Posts: 24


View Profile
« Reply #4 on: March 13, 2018, 17:58:24 pm »

thank you,
In vertical mod method no problem, but finsh is not good.
in waterline mod it doesn't work, i have the same problem, i download your cb file and try, the result is the same like me
salutations
Logged
dh42
Administrator
CNC Jedi
*****
Offline Offline

Posts: 5234



View Profile WWW
« Reply #5 on: July 04, 2018, 20:15:02 pm »

Hello

Solved in V 1.0.16
http://www.cambam.info/downloads/#devt

++
David
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM
Page created in 0.112 seconds with 20 queries.

Copyright © 2018 HexRay Ltd. | Sitemap