CamBam
News:
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
February 25, 2018, 16:59:09 pm


Login with username, password and session length


Pages: [1]
  Print  
Author Topic: Fanuc post  (Read 591 times)
jim1108
CNC Ewok
*
Offline Offline

Posts: 20


View Profile
« on: January 01, 2018, 20:29:58 pm »

Here is the fanuc post processor that came with CB that I modified to work better on older fanuc controls.

Haas machines should work fine as well with this post.

You still have to do a find and replace for the colons. Some older controls do not recognize them.
Give it a shot and let me know what you think.

Edit: updated Fanuc post to add tool comments and Z final depth of cut and depth per pass at beginning of each MOP as well as tool offset (H) callout with tool number.

Machine will go to home position (G28 Z0,Y0)  at the beginning and end of the program and before each tool change to ensure tool will not crash into part when indexing.

Also, machine will rapid to first X,Y position of cut on each MOP before it rapids to safe Z above part.

Entering comments in Tag portion of MOP will be posted in program as a comment after tool callout.

Entering a G code command in the custom mop header section will insert the code right after the tool change and before any moves take place. This is a good place to insert any 4th axis rotations before running the mop.

I set this post up to be as fool-proof as possible.



* Fanuc.cbpp (1.96 KB - downloaded 4 times.)
« Last Edit: February 04, 2018, 13:09:47 pm by jim1108 » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM
Page created in 0.116 seconds with 18 queries.

Copyright © 2008 HexRay Ltd. | Sitemap