CamBam
News:
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
December 11, 2017, 16:52:28 pm


Login with username, password and session length


Pages: 1 ... 4 5 [6]
  Print  
Author Topic: Rounded-over chamfer of existing hole?  (Read 4831 times)
lloydsp
CNC Jedi
*****
Offline Offline

Posts: 7209



View Profile
« Reply #75 on: June 10, 2017, 02:14:20 am »

Eddy,
I fooled around with that curve some more, and it has to do with the curve-to-zero extension line, not with a 'conversion factor'.  If the curve doesn't extend toward zero more than the tool radius, it doesn't cut the whole curve.

Lloyd
Logged

"Pyro for Fun and Profit for More Than Fifty Years"
lloydsp
CNC Jedi
*****
Offline Offline

Posts: 7209



View Profile
« Reply #76 on: June 10, 2017, 02:27:42 am »

And, as goes dimensions:  the bottom of the curve appears to be spot-on, so far as I can tell.

Running CutViewer seems to reveal that the main body of the curve is accurate, but there's a tiny 'snipe' at the very top, which forms that larger-than-spec diameter.  I think my particular device would have been fine, but I can see times when that might cause a problem

Lloyd
Logged

"Pyro for Fun and Profit for More Than Fifty Years"
Pages: 1 ... 4 5 [6]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM
Page created in 0.148 seconds with 18 queries.

Copyright © 2008 HexRay Ltd. | Sitemap