CamBam
News:
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
January 21, 2020, 11:49:30 am


Login with username, password and session length


  Show Posts
Pages: [1] 2 3 ... 39
1  Support / CamBam help (General usage) / Re: V-Carving: single line fonts or V-Engrave plugin on: August 30, 2018, 00:33:23 am
Mark , play with the program some . Try all the letters. I have found to get the best results ,sometimes I have to lie to cambam. He only does what he is told . By that I mean , sometimes my tool choice is not the best, or I might want a different effect . I'll tell cambam one tool, and use a different tool .  This works when you have problems like you mentioned . Some letters are odd to cut  with a slightly larger bit. Again play around and learn the program , There is none better . I make a bunch of signs, and use a lot of crazy fonts.  Windows is full of them.










2  Support / CamBam help (General usage) / Re: Single line fonts on: June 24, 2018, 04:12:14 am
I'll second this. I just made a bunch of table signs. The single stroke font works great. Just install them in windows just like any other.Mine show up when I enter "text" in cambam.
3  Support / CamBam help (General usage) / Re: Is this possible in CB? on: May 28, 2018, 01:33:28 am
Pretty fancy molding?
4  Support / CamBam help (General usage) / Re: Acrylic glazing on: May 04, 2018, 23:01:28 pm
LLoyd, the other day you had mentioned "Shars".   I've cut quite a bit of the acrylic on my router with a bit I got from them. It's a single flute carbide but, it's way sharper than my regular mills. I got this on his reccomendation. It does a real nice job,just slow down the feed if it starts to get gummy.
5  Support / CamBam help (General usage) / Re: good job on: April 26, 2018, 19:58:15 pm
you know, things look slightly different here now. A new user should just take time to nose around. Things are all here ,just slightly different.
6  Support / CamBam help (General usage) / good job on: April 26, 2018, 00:46:37 am
Man ,it's good to see this back in action. Many thanks Andy and crew. Chuck
7  Support / Related Softwares / Re: CutViewer - License trouble. on: April 16, 2018, 17:17:36 pm
I also had trouble withe Cut viewer.  Emailed back and forth with CV and finally got the thing to work, only to have it screw up again. I went with Bobs idea.Works great enough for me.
8  Support / CamBam help (General usage) / Re: Noy always a square corner on: April 08, 2018, 15:03:32 pm
I agree also . The heavier the machine ,the more I would say . Even a dry way , or bearing adds up here.Send a file, someone here could run it and check to see what's what.
9  Support / CamBam help (General usage) / Re: hell to get old on: April 05, 2018, 18:34:44 pm
Got it David , Thank you, Chuck
10  Support / CamBam help (General usage) / Re: hell to get old on: April 05, 2018, 16:42:08 pm
Bob, good to hear from you. Thing is I have it set like you last mentioned but , I don't know what to do. to change it.
11  Support / CamBam help (General usage) / hell to get old on: April 05, 2018, 15:52:26 pm
I want to change my clearance plane  to a higher" default "value. Trouble is , I've forgotten how to do this. Would someone be kind enough to tell me how to do this.
12  Support / CamBam help (General usage) / Re: troubles on: April 05, 2018, 00:39:02 am
Many thanks David. Chuck
13  Support / CamBam help (General usage) / troubles on: April 04, 2018, 21:16:53 pm
My putor crashed . Can some one please point me to the stick fonts.
14  Support / CamBam help (General usage) / Re: polyline offset on: March 21, 2018, 14:49:08 pm
Claude, Yes, look at the lower left of your screen and study the "colllection " of points. Click on the word collection. You 'll see a small little tab popup . click on it.
15  Support / CamBam help (General usage) / Re: Help on unwanted lead out move on: December 28, 2017, 17:27:16 pm
Rather than your DFX, please put up the Cambam file. The guys here will need that to see your problem.
Pages: [1] 2 3 ... 39
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM
Page created in 0.097 seconds with 19 queries.

Copyright © 2018 HexRay Ltd. | Sitemap